Windline Marine Equipment and Accessories

Anchoring & Docking Parts by Category:

Boat Accessories - Anchoring and Docking

Anchors, Anchor Chocks, Anchor Rodes & Chain, Anchor Snubbers , Anchor Rollers , Anchor Shackles & Swivels, Boarding Steps, Deck Pipes, Dock Carts, Dock Lines, Fenders, Ice Eaters, Mooring Buoys

Anchoring & Docking Manufacturers

Windline Anchor Rollers

Windline has been designing and manufacturing Marine Equipment and Accessories.

Many of our boat and yacht products have been copied by offshore manufacturers with unreliable quality.

All our products are designed, manufactured and shipped from our factory in Gardena, California. Don't risk your safety or money on imitations - Buy genuine Windline top quality.
Windline Products:
Marine Accessories
Anchor Rollers
Fishing Accessories
Boat Ladders
Hand Rails

Contacts:

234 w. 146th St, Gardena, CA, 90248

Tel: (310) 516-9812

Fax: (310) 516-9824


Web: www.windline.com

Anchor Rollers:

AR-2
Small Fairlead Anchor Roller
Features:
For boats 20' to 30' with anchors up to 35 Ibs.
Handles line up to 1" diameter and chain up to 3/8"
Easily raise and lowers the anchor without damaging the hull or topside
Overall Length 6.5"
Outside Channel Width: 2"
Inside Channel Width: 1.75"
Replacement Wheel: W-25

AR-3
Large Fairlead Anchor Roller
Features:
Long reach roller for anchors up to 60 Ibs.
Handles line up to 1" diameter and chain up to 3/8"
Easily raise and lower the anchor without damaging the hull or topside
Overall Length 11"
Outside Channel Width: 2.25"
Inside Channel Width: 1.75"
Replacement Wheel: W-25

AR-4
Small Platform Anchor Roller
Features:
For boats 18' to 30' with anchor platform or bow planks and pivoting fluke anchors
Handles line up to 1/2" diameter and chain up to 3/8"
Mounts in or under slot to hold anchor under bow plank
Overall Length 3"
Outside Channel Width: 2.25"
Inside Channel Width: 1.75"
Replacement Wheel: W-25

AR-5
Medium Platform Anchor Roller
Features:
For boats 28' to 48' with anchor platform or bow planks and pivoting fluke anchor
handles line up to 1 1/2" diameter and chain up to 1/2"
Mounts in or under slit to hold anchor under bow plank
Overall Length 3"
Outside Channel Width: 4"
Inside Channel Width: 3.5"
Replacement Wheel: W-30

AR-6
Large Platform Anchor Roller
Features:
For boats 35' to 75' with anchor platforms or bow planks and pivoting fluke anchors
Handles line up to 1 1/2" diameter and chain up to 1/2"
Mounts in or under slot to hols anchor under bow plank
Overall Length 5.75"
Outside Channel Width: 4"
Inside Channel Width: 3.5"
Replacement Wheel: W-40

AR-7
Medium Fairlead Anchor Roller
Features:
For boats 20' to 45' with anchor platform or bow planks and pivoting fluke anchors
Handles line up to 1" diameter and chain up to 3/8"
captive ball lock pin holds line or chain securely in the channel
Overall Length: 9"
Outside Channel Width: 2"
Inside Channel Width: 1.75"
Replacement Wheel: W-25

BL01
Stainless Steel Bail
Features:
Replacement bail for CRM-1

BL02
Stainless Steel Bail
Features:
Replacement bail for URM-2

BL03
Stainless Steel Bail
Features:
Replacement bail for URM-3

BL04
Stainless Steel Bail
Features:
Replacement bail for URM-4

BL06
Stainless Steel Bail
Features:
Replacement bail for URM-6

BRM-2
Bruce Anchor Roller Mount
Features:
For boats 9' to 30' with Bruce anchor sizes 2.2 Ibs. to 16.5 Ibs. or Delta anchor 14 Ibs. to 22 Ibs.
Patented self adjusting system permits various size anchor to mount without rocking or rattling
Non-chafing design
Overall Length 15.25"
Outside Channel Width: 2.75"
Inside Channel Width: 1.75"
Replacement Wheel: W-25

BRM-3
Bruce Anchor Roller Mount
Features:
For Bruce anchor sizes 22 Ibs. to 66 Ibs. or Delta anchors 14 Ibs. to 35 Ibs.
Patented self adjusting system permits various size anchor to mount without rocking or rattling
Non-chafing design
Overall Length 23"
Outside Channel Width: 4.75"
Inside Channel Width: 3.5"
Replacement Wheel: W-40

BRM-4
Bruce Anchor Roller Mount
Features:
For Bruce anchor sizes 22 Ibs. or Delta anchors 14 Ibs. to 22 Ibs.
Captive pin locks the anchor in place - eliminates movement underway
Allows anchor to be self launching
Overall Length: 22.75"
Outside Channel Width: 3.5"
Inside Channel Width: 3"
Replacement Wheel: WH07, WH08, WH09

CAR-4
Pivoting Medium Cantilever Anchor Roller
Features:
For standard and deepset Danforth anchors from 13Ibs. to 28Ibs. and Fortress anchors
Marine grade stainless steel cantilever roller permits self launching and rattle free stowage
Overall Length 19"
Outside Channel Width: 3.25"
Inside Channel Width: 3"
Replacement Wheel: WH15 (x2)

CAR-5
Pivoting Large Cantilever Anchor Roller
Features:
For standard and deepset Danforth anchors from 22Ibs. to 60Ibs. and Fortress anchors
Marine grade stainless steel cantilever roller permits self launching and rattle free stowage
Overall Length 24.5"
Outside Channel Width: 4"
Inside Channel Width: 3.5"
Replacement Wheel: W-30 (x2)
Price:

CR-1
Narrow Anchor Roller
Features:
For Danforth, Fortress, and Delta type anchors
Useful where there is limited deck space for mounting a larger roller
Overall Length 20"
Outside Channel Width: 3"
Inside Channel Width: 2.5"
Replacement Wheel: WH17
Replacement Bail: BL06

CRM-1
Plow Anchor Roller Mount
Features:
For boats 27' to 75'
Securely stows plow-type anchors 20Ibs. to 60Ibs.
Stainless bail holds line up to 1 1/2" diameter and chain up to 1/2: within wide channel
Overall Length 23.5"
Outside Channel Width: 4"
Replacement Bail: BL01
Inside Channel Width: 3.5"
Replacement Wheel: W-30

URM-1
Universal Anchor Roller Mount
Features:
Handles and sows plow, Danforth, Fortress and Delta type anchors
For boats 25' to 54'
Handles line up to 1 1/2" diameter and chain up to 3/8"
Flared mounting tips help eliminate chafe
Ideal or small boats
Overall Length 22.75"
Outside Channel Width: 4.25"
Inside Channel Width: 3.75"
Replacement Wheel: W-40

URM-2
Small Anchor Roller Mount
Features:
For Fortress anchors through FX-23 and Danforth to 13Ibs.
Bail holds line up to 1" diameter and chain up to 3/8"
Flared mounting tips help eliminate chafe
Ideal for small boats
Overall Length 15.5"
Outside Channel Width: 2"
Inside Channel Width: 1.75"
Replacement Wheel: W-25
Replacement Bail: BL02

URM-3
Large Anchor Roller Mount
Features:
For Danforth, Fortress and Dela type anchors
For boats 25' to 54'
Handles line up to 1 1/2" diameter and chain up to 1/2"
Low profile design
Overall Length 22.75"
Outside Channel Width: 4.25"
Inside Channel Width: 3.75"
Replacement Wheel: W-30
Replacement Bail: BL03

URM-4
Medium Anchor Roller Mount
Features:
For Danforth, Fortress, and Delta type anchors
For boats to 35'
Ideal for mounting anchors where ther is limited deck space
Heavy-duty construction
Overall length: 18"
Outside Channel Width: 3.5"
Inside Channel Width: 3"
Replacement wheel: WH16
Replacement Bail: BL04

URM-7

Universal Anchor Roller Mount
Features:
With a removable secondary wheel and an adjustable head, virtually any Plow or Fluke type anchor to be used
Handles line up to 1 1/2" and chain up to 1/2"
Heavy-duty construction
Patent Pending