HD, HD+, and XL Roll-On Boat Lifts / standard or extended version

Boat Parts, Interior & Furniture

traditional boat davit systems

Are you tired of having to remove your outboard before loading your boat. Thanks to DinghyRamp™ HD, HD+, and XL Roll-On Boat Lifts you can carry your tender without bad-looking winches or hydraulics detract from the beauty of your boat. Now you can to launch your dinghy easy and remove the lifting arms.

Pull-on davit systems for boats by Nautley, Inc.

www.dinghyramp.com

Roll on boat lift by Dinghy ramp

HD Slide-On Boat Lift

It's simple, thanks to Slide-On Boat Lift you could haul your yacht’s tender without removing the motor, without unsightly winches or bars, and without hard to handle parts. To allow you to simply pull for retrieval and push for launching DinghyRamp™ HD by DinghyRamp™ comes equipped with non-marking arms with stainless steel hardware . Suited for tenders up to 11 feet in length Slide-On version can load capacity up to 400 pounds for both deep V RIBs and flat bottoms.

HD Slide-On Boat Lift

Requirements for Swim Platform:

Standard: Boat Platform depth: 32" or larger

Slide-On Boat Lift comes equipped with Bolts, Compression Shims, Quick Kit
Backing Plates, with or without Quick Kit Mounting Shoes.

 

HD+ Roll-On Boat Lift

Roll-On version Boat Lift allow you to simply pull for retrieval and push for launching. You do not have to worry about the winches and unsightly bars. You do not nedd to remove your outboard before loading your tender.

HD-plus Boat Lift

Compact and easy to stow Roll-On Boat Lift comes equipped with stainless steel roller shafts, with less effort for quicker loading with Poly vinyl rollers,shock-absorbing lifting arms. Designed with Heavy Duty roller arms Roll-On Boat Lift is rolled sideways onto tilting arms. Recommended for inflatable keel bottoms and moderate ( such as: Avon Lite,AB, Zodiac) V RIBs.

Requirements for Swim Platform:

Standard: Boat Platform depth: 32" or larger

Slide-On Boat Lift comes equipped with Bolts, Compression Shims, Quick Kit
Backing Plates, with or without Quick Kit Mounting Shoes.

XL Roll-On Boat Lift (large version)

XL Roll-On Boat Lift

If your boat swim platform not large enough to properly transport a tender now you can maximize your yboat’s space with the DinghyRamp™ XL version. Load capacity up to 500 pounds and suited for tenders up to 11 feet in length. As long as you’re using a small dinghy, well under the 500 - 600lb limit, should be fine. Lots of lakes don’t have sand bars or even anything that resembles a beach. Don’t forget, the heavier you go, you may need extra support.

XL Roll-On Lift

Requirements for Swim Platform:

Perfect for swim platforms 18" and larger


Requirements:

Swim platform: The Nautley, Inc. gave guidance on which model based on depth of swim platform.

Hard or soft bottom: soft bottom, and the lesson learned is that is has to be fully inflated or the stringers and wood floor sections start to warp. If you have a solid bottom/RIB, you’d never have a problem. Note: the more rollers the better.

davit systems Manufacturers

Trick Davit Systems

The cradles come off in 2 minutes leaving behind a low profile mounting bracket. Trick Davits mounting brackets take up minimal space on the edge of the swim platform. Haven't stubbed a toe yet. And when the dinghy is on there you are not using the platform anyway. When the dinghy is launched, the cradles tilt up and are mostly out of the way.

http://www.trickdavit.com/

Harbormen Marine

If you need a lot flexibility. There are a lot of pics on that web site with all sorts of boat styles too and several express cruisers. (Most of them had it lifted up.) Inflatable boat installed on your swim platform edge and with both pivot adjustment straps connected to one cleat will allow clear access from dock to transom center door.

http://www.harbormenmarine.com/