Albatross - aluminum Power boats/fishing boats - Russian manufacturer
Power Boat Russian builders
Company "Albatross" - Information/Models
Boat Building: Albatross Company models
Fisherman - 4,15x1,75, Motor boat for fishing and hunting, planing, plastic boat, made of fiberglass with high quality European polyester resins. The design allows you to set the motor boat boat engine capacity from 5 to 30 l / s. Motor Boat model "Fisherman" is intended for use in fresh and salt water, swimming on a wave - up to 0.7 meters
Albatross - 4,40x1,70,Motor boat "Albatross"
designed for use in fresh and salt water during storms to 2 points.
The boat can be used for water walking, passing tourism, hunting and fishing in coastal rivers and lakes..
The hull consists of three separate sections - a body, cockpit,
deck, molded from polyester resin by "Norpol" with glass
fiber reinforcement fabrics.
The hull has a thickness of from 5 to 9 mm in the transom, up to 20 mm. Transom in the motor installation strengthened stainless steel plate.
the cockpit is made of anti-slip coating. Planing surface of the bottom of the outside has 4 planing steps, and inside reinforced by two box-shaped stringers, laid the entire length of the hull and priformovannymi to him. Cockpit boat has a capacity of 1.5 cu. m, dry cockpit
Albatross 2 - 4,40x1,75,A modified version of the motor boat "Albatross" - a motor boat for fishing. Production boats "Albatross 2" organized for the purpose - to create a version of the fishing motor boat , without the bow deck and windscreen - with a spacious cockpit and shifted to the right driver's console. "Albatross 2" - a motor boat for fishing and hunting, plastic boat for tourism., motor can be used in fresh and salt water.
Albatross 3-4,40x1,75,A modified version of the motor boat
Albatross 535- 5,35x2,25,Especially manufactured for fans of fishing, it was decided to make a new model of motor boats are not only larger and speed, but also has a large width at the bow. When declared, "fishing" focus on the case "Albatross-535" boat modek is a universal, suitable for high-speed and can use for recreational watersports
Retro - 4,28x1,36, Row, motor boat, -Plastic boat "Retro" is designed for use in fresh and salt water in areas with temperate climates.
Excellent and very fast rowing boat is ideal for rental at the recreation center.
The boat can be used for water walking, passing tourism, hunting and fishing in coastal rivers and lakes.
The boat is very stable, providing the angle of heel not more than 20 degrees, the smaller the angle of flooding, equal to about 30 degrees.
Perch -3,01x1,26 Easy to operate rowing Plastic boat designed
for fishing and hunting are made from high quality polyester resins
The design allows you to set the boat outboard power from 2 to 15 l / s.
The boat has a high lateral and longitudinal stability, allowing to make shots from a gun, standing at full height, perfect for fishing with spinning rods.
Pleasure rowing boat is easy to wave without splashing the cockpit.
Installation of two pairs of oars makes it possible to row with any banks.
Luck - 2,10x1,20, A plastic boat for fishing and hunting is made of fiberglass-reinforced polyester European resin molding contact method . The use of imported resin ensures durability of the boat, as it does not absorb water or crack and lose color. The boat model is designed for recreation and for hunting and fishing.
In the fore and aft buoyancy boats blocks, making the boat safe
The setting of a boat motor up to 2.2 l / s.Average beam is removable, which allows, if desired to sleep on the bottom of the boat.
Address: 423800, Flower Avenue, Naberezhnye Chelny, Tatarstan, Russia
We Albatros Company manufacture boats (rowing boats, new boat), paddle boats and catamarans. Production boats are certified. Boats are made of fiberglass with high quality polyester resins in Europe.
Fiberglass is 3.5 times lighter than steel, and steel for the specific strength. In the manufacture of equal structures of steel and fiberglass, fiberglass construction is several times lighter and boats manufacturing is no exception. In this case the use of these materials ensures durability of the boat, it does not absorb water, does not crack and lose color.
Our boats have been highly appreciated by experts of the magazine "Boats & Yachts" .
Shipbuilding Company "Albatross" (LLC "Story-Plus") is their product: "Boats & Yachts" (copies of articles in the "Press about our boat ').
Shipbuilding Company "Albatross" sale and manufacturing:
Model : powerboat Fisherman
Model : powerboat Albatross
Model : powerboat Albatross 535